Producing Units and Products

Producing Units and Products

High-density Polyethylene Unit

HDPE unit of Jam Petrochemical Complex under LYONDELL BASELL Company’s license and basic engineering of KRUPP UHDE, with an annual producing rate of 300,000 tons, is one the largest polymer units in Iran. Beside the feasibility to produce 26 main grades, the unit also bears the possibility to produce black, yellow, blue, orange and normal grades. These specifications exclusively belong to Jam Petrochemical Complex within the country and is scarce worldwide.
HDPE unit of Jam Petrochemical Complex is the first producer of black grade (CRP100 pipe) in Iran.

Handellling and Health Safety

Molten polymers could be injured skin or eye so safety glasses and appropriate gloves are suggested to prevent possible thermal injuries. Also appropriate ventilation is suggested in working by melt polymer. Accumulation of fines or dust particles that are in this grade is not suitable because of explosion hazard probability. So adequated filters and grounding exists at all time are recommended.

Storage

Polyethylene products (in pelletised or powder form) should not be stored in direct sunshine and/or heat radiation. Ultraviolet cause a change in the material properties.The Storage area should be dry and preferably don’t exceed 50 °C. Under cool, dry, dark conditions Jam Polymers polyolefin resins are expected to maintain the original material and processing properties for at least 18 month. . JPC would not ressponsible about quality diminishing such as color change, bad smell or ets which caused by bad storage conditions. It is better to process PE resin within 6 months after delivery.

Packaging

Jam Polymers Polyolefin resins are supplied in pllet form packed in 25kg bags. Alternative packaging modes are avalable for selected grades.

Grades

Application

Processing Method

1. INJECTION MOLDING

HC 7260 (I3/UV)

For transport and stacking bottle crates,particularty bottle creates

23±3

0.960±0.002

HD 7255 (I4/UV)

For thick walled highly stressed transport container, e.g. refuse bins and fish crates

11±2

0.954±0.002

2. SMALL BLOW MOLDING

HF 4750

For disinfectant bottles up to 2 liters

Tubes for cosmetics, containers up to 10 liters and petrol cans up to 5 liters

1.1±0.3

0.944±0.002

 

Available

HF4760 (BL3)

For container with capacites ranging from a few ml up to 10liters

Production of sheets for thermoforming

1.2±0.3

0.954±0.002

 

HH 4765

For hollow articles where high stress cracking resistance is not demanded, such as bottles and caisters up to 10 liters, e.g. for fabric softeners

1.5±0.3

0.959±0.002

3. LARGE BLOW MOLDING

Available

HM8355 (BL4)

General-purpose grade for large containers

0.35±0.06

0.951±0.002

4. STRETCHED TAPE (RAFFIA)

HF 7740 F

Stretched films and tapes for production of high-strength knitted and woven

1.8±0.3

0.944±0.002

HF 7740 F2

Tapes to be used for agricultural packagings and as protective cover

1.8±0.3

0.944±0.002

5. MONOFILAMENT

HF 7750 M

Production of monofilaments with high tensile strength

2.5±0.3

0.956±0.002

HF 7750 M2

Monofilaments for fishing notes , geo textiles and civil engineering

3.3±0.3

0.956±0.002

6. CABLE

HF 4750 K

Cable insulation

3.5±0.5

0.946±0.002

7. PIPE (NATURAL/COLOR)

Available

HM 5010 T2N (EX3)

Pressure pipes, e.g. drinking-water and gas pipes,waste pipes and sewer pipes, their fittings and also sheets (UV stabilization and pigments during processing)

0.45±0.06

0.945±0.002

HM 5010 T3 N

High-quality PE 80 pressure pipes for gas and water transportation(UV stabilization and pigments during processing)

0.43±0.03

0.944±0.002

HM 5010 T3 Black

0.954±0.002

Available

HMCRP100N (PE100)

Top quality PE 100 pressure pipes for gas and water transportation at higher pressures or with thinner walls as PE 80 (UV stabilization and/or pigments during precessing)

0.22±0.02

0.948±0.002

Available

HMCRP100 (Black)

0.957±0.002

HM CRP 100 Blue

0.948±0.002

HM CRP 100 O/Y

0.949±0.002

8. FILM

HM 9455 F

For blown films with paperlike quality

Suitable for counter, bags, carrier bags and wrapping films

Excellent processing

0.28±0.05

0.956±0.002

Available

HM 9450 F (EX5)

0.949±0.002

HM 9450 F1

0.22±0.05

0.950±0.002

HM 9455 F1

0.957±0.002

HM 9445 HT

0.18±0.03

0.944±0.002

 

Unique specifications of HDPE unit in comparison with other units:

• Variable products regarding the variety of produced grades

• High production capacity

• Feasibility to produce colorful grades and possessing two extruder and packaging lines

تصاویر ضمیمه

  • Producing Units and Products
تمام حقوق این وب سایت برای پتروشیمی جم محفوظ است